Payment & Shipping Terms:
|Type:||Jet Grouting Drilling Rig||Usege:||Single/Double/Triple Grouting|
|Hole Dept:||50-60 M||Hole Diameter:||Φ110~150 Mm|
|Diesel Engine Power:||11 Kw||Weight:||950kg|
water well drilling equipment,
hydraulic drilling rig
Jet Routing Machine Anchor Drilling Rig For Grouting Purpose Single Double Tube
MG-50AX anchor engineering drilling rig is used for anchoring deep foundation pit, reinforcing roadbed and dam foundation, preventing landslide and rock collapse. It can be applied in direction jet-grouting, pendulum jet-grouting, circulation jet-grouting work, and used for high pressure jet-grouting work in Quaternary Cover Area such as soil, sand, pebbly sand and so on.
It is a mechanical top drive power head type drilling machine, with mechanical transmission and hydraulic feeding structure. It can drill not only 0~ 90 degree holes, but also about –5 degree elevation angle holes.
It is suitable for percussive-rotary drilling (DTH hammer drilling) and rotary drilling. It is also used for auger drilling. It has a vast range of drilling formation and high drilling efficiency.
The drilling rig can apply singe pipe, duplex pipe, triplex pipe tools and so on.
|Drilling diameter||¢ 110- ¢ 150mm|
|drill specifications||single tube ¢ 42-50mm double-barreled ¢ 60-73mm|
|Drilling tilt angle||-5 degrees to 90 degrees|
|Power head output speed||n: 19,38,70,120rpm anti: 16rpm|
|Power head lifting force||rated 24kN, a maximum 30kN|
|power head feed force||rated 16kN, a maximum 21kN|
|Power head stroke||2.3m or 1.8m optional|
|Power head lifting speed||0-0.25m / s (adjustable)|
|Rated output torque of the power head||1500Nm|
|power machine (motor or diesel engine according to user requirements with) motor model Y160L-6 Power||11kw|
|Rig Dimensions (transport status) length × width × height||3400 × 1500 × 1500mm|
1. The drilling rig can apply singe pipe, duplex pipe, triplex pipe tools and so on. Optional pendulum jetting device can be added to achieve the pendulum jet-grouting function.
2. Applicable for wide range of layers,the drilling rig has a variety of drilling methods, like: Dry-auger, DTH hammer impacting, ODEX tools casing following, etc.
3. The drilling rig has various chassis mode like skid mounted, crawler mounted, step walk mounted and so on. Depending on customer’s requirement, customer can decide to choose which chassis by himself.
Contact Person: Manager