Payment & Shipping Terms:
|Name:||Hydraulic Drilling Machine||Type:||Rotary Drilling Rig, Drilling Rig|
|Hole Dept:||80-100 M||Hole Diameter:||Φ130~220 Mm|
|Power Head Stroke:||1800 Mm||Weight:||1700kg|
water well drilling equipment,
hydraulic drilling rig
Small Split Hydraulic Machine Anchor Drilling Rig Slope Construction Light Weight
1. YG-80 construction drilling rig is a full hydraulic operated top drive power head drilling machine,is designed on steep slopes,this allow drilling rig can be carried out with low machine weight and dangerous site .
2. It can be used for deep base pit of high building, anchor and reinforce side-slope for water conservatory project, water power station project, railways and highways,specially used in high position side-slope protection and drainage holes.
3. It also used to prevent or solve geologic calamity, such as landslide and rock collapse etc. In addition, it is also used to drill small size water well and high- pressure jet grouting hole.
4. It is assembled by pump station,control station and main frame,the operator can work away from the hole to improve working environment .
5. The split type is for easy shift and installation.1200mm length of mast is for small work place.
|Drilling depth||80-100 (m)|
|Drilling diameter||¢ 220- ¢ 130 (mm)|
|Drill diameter||¢ 114 × 1500, ¢ 89 × 1500 (mm)|
|Drilling dip||0 ~ 120 °|
|Power head output speed (forward and reverse)||5-180rpm|
|Rated output torque of the power head||3500NM|
|Power head stroke||1800 mm|
|Mast slip stroke||500 mm|
|Power head maximum pull force||45KN|
|Power Head biggest feeding force||30KN|
|Hydraulic system rated pressure||18Mpa|
|Motor Type Y200L-4 Power||30KW|
|Host Dimension||3400 × 1000 × 1500 (mm)|
|Maximum part weight (excluding motor)||200Kg|
1. Compact structure,light weight,easy move,stronge applicability to construciton site,suitable for construciton in the hills.
2. High efficiency in drilling and high quality of boring.It can be used with many drilling methods such as carbide bit drilling, anger drilling, DTH hammer drilling, follow-up casing drilling etc.
3. Mast can be fixed on staging immediately without drill frame with auxiliary parts, which makes it possible for reduce rig weight and fastener.
4. This rig can accomplish jet grouting construction site through module replacement.
5. The rig has a wide scope of angle from elevation 10° to depression 90°,the slide frame can slide and move easily.
6. A set of front-mounted adjustable columns on drill frame is used for adjusting the height of mast front-end, which makes it convenient to align with working position.
Contact Person: Manager