Drilling Tool Wireline Drilling Core Barrel High Efficiency Low Labor Intensity
Wire-line core drilling equipment is very commonly used for mineral exploration for deep holes because of practical usage,the Q series overshot assembly is a kind of tool specially used to salvage and place inner tube assembly.
Wire line core barrels are used for deep holes, mostly because they do not need couple and uncouple the rod string each time the core is retrieved. An overshot assembly is dropped on a cable and directly connect to the inner tube assembly, allowing fast retrieval of the core after each operation.
Their advantages are higher penetration,higher core recovery ratio.Longer bit life and lower labor intensity,and the advantages get more clear with the increasing of hole depth.
The head assembly has latching and pivoting spear point mechanisms which allow insertion and retrieval of the inner tube assembly, a bearing assembly to allow the inner tube to remain stationary and avoid sample damage while drilling, fluid pressure operating indications and fluid control valves.All head assemblies incorporate a shut off valve assembly which provides a fluid pressure signal to the drill operator when the valve members are compressed, indicating a full or blocked inner tube.
Available for each size of overshot assembly,this is the retrieval device lowered on the wireline to recover the inner tube assembly containing core.
At present, we have four kinds of Q series overshot assembly: BQ, NQ, HQ and PQ.
Wireline double core barrel consists of:
1. Head Assembly
2. Inner Tube: 1.5m or 3.0m
3. Stop Ring
4. Core Lifter
5. Core Lifter Case
6. Locking Coupling
7. Adapter Coupling
8. Landing Ring
9. Outer Tube: 1.5m or 3.0m
10. Inner Tube Stabilizer
11. Thread Protector
|Q Series Wireline Double Tube Core Barrels|
|BQ||59.3||36.2||BQ rod box|
|NQ||75.2||47.6||NQ rod box|
|HQ||95.6||63.5||HQ rod box|
|PQ||122||85||PQ rod box|
|Q Series Wireline Triple Tube Core Barrels|
|NQ3||75.2||45||NQ rod box|
|HQ3||95.6||61||HQ rod box|
|PQ3||122||83||PQ rod box|
It has some advantages such as high penetration rate, high core recovery ratio, long bit life and lower labor intensity.The advantages can get more clear with the increasing of drill hole depth.
Wire-line core drilling equipment is very commonly used for mineral exploration for deep holes.